馬桶维修 通渠 馬桶维修seo專家with the bolt

Then disconnect the pipe going to the flush valve. Then remove the bolts holding the toilet to the floor. Drain off all the extra water with a wet / dry vacuum, or by dipping it out of the toilet. Place a tarp or plastic trash bag on the floor to set the toilet on. Pick the toilet up and set it on the tarp. Then scrape off the old wax seal and replace it with a new wax seal. Also, place your bolts into the slot for the bolts on the flange. Then reset the toilet, being careful to line up the holes with the bolts.  馬桶维修 通渠 馬桶维修seo專家 They also are made of plastic and can easily be trimmed to be even with the outer edge of the toilet. If you have caulk around the base, you may need to trim this caulk off before installing the wobble wedges. Place the wedges into the largest gap area, pressing them firmly under the toilet. Then check to see if that solved the rocking. If the toilet is still rocking you may need to loosen the bolts on each side next to the floor, and push the wedge under a little further. Check again after tightening these bolts to see if that corrected the rocking. 如果沒有合適的碳粉複印機的病情可能會惡化。一種調色劑基本上是用在諸如激光打印機和複印機也機打印機的電源。它形成在該被插入到複印機的複印紙上的圖像和文字。在這些機器中色調劑用各種聚合物化合物的稠合到紙上。定影加熱的調色劑顆粒與顆粒粘到紙上。